Wenzhou New Blue Sky Electrical Co.,Ltd
Wenzhou New Blue Sky Electrical Co.,Ltd Focusing on Circuit Breaker manufacturing High quality materials, professional production
Add to Cart
Residual Circuit Breaker Cost 32a Rccb,Rccb Breaker, IEC61009 Standard, CE,CB TUV Certified
1. APPLICATION
NBSL1-100 series residual current circuit breakers are applied to the lines with AC 50/60Hz,rated voltage of230V(1P+N) or 400V(3P+N),and rated current of 100A.In case of electric shock or electric leakage current exceeds the specified value, the residual current circuit breaker can switch off the fault circuit in a very short time, protecting the safety of person and electric equipment.
Can be used in the industrial, commercial, high-rise buildings, civil residences and other places.
2. TECHNICAL PARAMETER
| Technical Parameter | |||
| Spec Parameter | |||
| Rated Operating voltage(Ue) | 230V(1P+N)/400V(3P+N) | ||
| Rated Current(In) | 6,16,25,32,40,50,63A | ||
| Tripping Type | Electronic,Electromagnetic | ||
| Characteristic | A type, AC type, S type | ||
| Poles | 1P+N,3P+N | ||
| Rated Frequency | 50/60Hz | ||
| Rated Insulation voltage(Ui) | 500V | ||
| Rated residual current (IΔn) | 10,30,100,300mA | ||
| Rated residual switching on and | 800A | ||
| breaking capacity(IΔm) | |||
| Rated residual short-circuit current | 6000A | ||
| limit(IΔc) | |||
| Rated short-circuit current limit(Inc) | 6000A | ||
| Rated switching on and breaking capaity(Im) | 800A | ||
| Maximun breaking time(IΔm) | 0.3s | ||
| Rated impulse withstand voltage(Uimp) | 6kV | ||
| Mechanical life(times) | ＞10,000 times | ||
| Standard Certificate | |||
| Comply with Standard | IEC 61008 | ||
| GB 16916 | |||
| Certificate | CE, CB, RoHS,WEEE | ||
Residual Circuit Breaker Cost 32a Rccb,Rccb Breaker, IEC61009 Standard, CE,CB TUV Certified
| Working Envirnment | ||
| Humidity | 40℃ humidity notexceed 50% 20℃ humidity not exceed 90% | |
| (Condensation on the product due to | ||
| changes in humidity has been considered) | ||
| Working Temperature | -5℃~+40℃ and its average over aperiod of 24h does not exceed | |
| Magnetic field | No more than 5 times the geomagnetic field | |
| Pollution level | 2 | |
| Altitude(m) | 2000 | |
| Mounting and Wiring | ||
| Shock and vibration | Should be installed in the case of no obvious impact vibration | |
| Installation category | Ⅲ | |
| Terminal connection types | type cable,type U bus, TH 35mm Din-rail | |
| Wiring terminal connection conductor | 1.5～25 mm² | |
| Wiring terminal copper size | 25 mm² | |
| Tightening torque | 3.5N*m | |
| Installation mode | UsingTH35-7.5 profile installation, the title of | |
| installation face and vertical face is not greater than5° | ||
| Wiring incoming mode | upper and lower incoming is possible for ELM type, | |
| only upper incoming for ELE type | ||
3. OPERATION PRINCIPLE FIG.
Residual Circuit Breaker Cost 32a Rccb,Rccb Breaker, IEC61009 Standard, CE,CB TUV Certified
An RCD is a sensitive current breaker designed to protect the user and their property from electric shock and potential fires by breaking the current as is passes through your consumer unit in the event of a detected imbalance or disruption to current path. RCDs are known to save lives and are a commonly used component in domestic consumer unit configurations.
These RCD modules will use 2 modules/ways on your ESR consumer unit rail bar, and will trip the entire circuit associated with it in the event of a detected fault.
These modules are ideal for use with lighting/heating circuits in B curve (uses where switching surges are low or non-existent).
These RCCB modules are designed to trip at a 30mA imbalance with 100mA options available. We advise consulting your electrician if you are unsure which current rating is right for your desired application, as the wrong type may cause unnecessary tripping or create a potential hazard.
FAQ:
Q1: What's your product Range?
A.
- Shell Unti-fire. nylon pa66 or not unti-fire.
- Parts, Copper or iron
- Point Sliver point or Copper point
Q2: Are you a manufacturer?
A. Yes, we are only produce the circuit breaker over 20 years from 1999.
Q3: Do you have stock products to sell?
A. No,we work on OEM orders, The means, material, quantity,packing solution,etc will depend on your requests.obviously, your logo can be printed on the products.
Q4. what's the payment term?
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q5. how's the delivery time ?
A. usually it will take about 30 days for 30000pcs
Q6. tell me the standard of package?
A. Normally are cartons, color box or white box
Q7. what kind of material of circuit breaker?
A. we have two types, one copper coil with silver point and the other is brass coil with copper point. It depends on your requirement. In fact, those two have no difference if normal work well. Only except the electrical life. Copper and silver is better and also higer price.
Q8. We want to know month capacity.
A. 400,000pcs/month
Q9. Where is your market?
A. Our products are popular in Western Europe, Middle-East, Afirca, South Asia ,South Ameirca countries and area. Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.
Q10. what kind of certificate you have ?
A. CE, CB,CCC,ISO9000.
Q11. Do you inspect the finished products
A. Yes.Each step of products will be inpected by QC department before shipping.
Q12. How are you ship the finished products?
- By Sea
- By plane
- By counties,TNT, DHL,FEDEX,UPS.etc.